Cast Iron Rising Stem Resilient Seated Groove Gate Valve
The ductile iron core is fully vulcanized with EPDM rubber, no iron parts are exposed to the medium and the excellent rubber vulcanization prevents creeping corrosion underneath the rubber.
Guides in the wedge and on the valve body ensure a uniform closure, safe operation ensured as the guides prevent overloading of the stem.
Stainless steel stem with rolled threads for high strength.
The valve can replace stem seals under pressure.
Full bore.
Body inside and outside fusion bonded epoxy coating with excellent corrosion resistant performance.
Technical Parameters | |||
Nominal Diameter (mm) | 50~300(63-315) | 50~300(63-315) | |
Nominal Pressure (Mpa) | 1.0 | 1.6 | |
Testing Pressure | Sell (Mpa) | 1.5 | 2.4 |
Seal (Mpa) | 1.1 | 1.76 | |
Suitable Temperature | ̶40C°-150C° | ||
Suitable Medium | Drinking water , sewage , seawater , irrigation or other neutral liquid |
- Description
- Additional information
- Inquiry
Description
Cast Iron Rising Stem Resilient Seated Groove Gate Valve
Standard | DIN3352F5, BS5163 | ||
Design Standard | EN1092-2 ,PN10/PN16 | ||
Flange Drilling Standard | EN558-1 Series15 | ||
Face To Face Standard | EN1266 | ||
Hydraulic Test Standard | Seat 1.1*PN(in bar), Body :1.5*PN(in bar ) |
Groove Gate Valve
Main Raw Material | |||||
1 | Body | Ductile Iron | 9 | Gland Bolt | Steel gr8.8 |
2 | Wedge Disc | Ductile Iron + EPDM Coated | 10 | O-ring | EPDM Rubber |
3 | Wedge Nut | Bronze | 11 | Gland | Ductile Iron |
4 | Stem | Stainless Steel | 12 | Nut | Steel gr8.8 |
5 | Bonnet gasket | EPDM Rubber | 13 | Cap | Ductile Iron |
6 | Bonnet | Ductile Iron | 14 | Bonnet Bolt | Steel gr8.8 |
7 | Thrust Collar | Brass | 15 | Ruuber Seal | EPDM |
8 | O-ring | EPDM rubber |
SIZE | Pipe O.D | OD | Groove Dia | Gasket Seat | Groove Width | Groove Depth | |
IN | DN | ɸA | ɸB | C | D | t | |
2-1/2″ | 65 | 73 | 73 | 69.09 | 15.88 | 7.95 | 1.96 |
3″ | 80 | 88.9 | 88.9 | 84.94 | 15.88 | 7.95 | 1.98 |
4″ | 100 | 114.3 | 114.3 | 110.08 | 15.88 | 9.53 | 2.11 |
6″ | 150 | 168.3 | 168.3 | 163.96 | 15.88 | 9.53 | 2.17 |
8″ | 200 | 219.1 | 219.1 | 214.4 | 19.05 | 11.13 | 2.35 |
Groove Gate Valve STANDARDS:
Design: AWWA515
Groove Standard: Metric or AWWA C616
Pressure Test: EN 12266-1 Rate A.
EU directive 2014/68/EU
GENERAL CHARACTERISTICS:
Range from ND50 up to ND300.
Full bore.
100% Tightness in both ways.
Minimum head loss.
Low torque values.
Epoxy paint 250 microns
WORKING CONDITIONS:
Pressure Ratings: 300PSI
Working Temperature: -10C +100C
Suitable Media: Water
Additional information
Size | DN65-200 |
---|---|
Body | Ductile Iron |
Wedge | Ductile Iron+EPDM |
Stem | Stainless steel |
Pressure | PN10-16 |
Operation | handwheel |
Applications | Drinking water、sewage、seawater、irrigation,or other neutral liquid. |